Low Flow Turbin Flow Meter

The SEB is a plated brass low flow meter suited for clean water. It is available in 1/2” and 3/4” thread, with union type meter couplings for easy installation and service. This meter is ideal for flow rates between 0.2 and 18 GPM. The SEB has only one moving part, the propeller.


A 5-30 Vdc current sinking pulse output makes the SEB ideal for many industrial control applications. This signal interfaces easily with programmable logic controllers and computer input boards. SEB meters can also be used in conjunction with the Seametrics FT420 flow computer for reading flow rate and total flow, or AO55 for 4-20 mA output. For metering pump pacing applications, a standard PD10 pulse divider is recommended.

FEATURES
  • Single-jet meter
  • Compact brass body
  • Union couplings
  • Easy installation and maintenance
  • Interfaces with many controls and displays

APPLICATIONS
  • Industrial control operations
  • Low flow situations
  • Clean water
Specification


Sensor
GMR 5-30 Vdc current sinking pulse
Fittings
1/2”, 3/4” male NPT union couplings
Material
Body
Nickel-plated brass
Rotor Chamber
Brass
Rotor
Thermoplastic
Shaft
Tungsten Carbide
Bearings
Water-cooled Thermoplastic
Maximum Temperature
185˚ F (85˚ C)
Maximum Pressure
175 psi (12 bar)
Cable
#22 AWG 3-cond, 12’
Maximum run 2,000’ (610 m)
Flow Range
1/2”: 0.2 - 10 gallons per minute
3/4”: 0.2 - 18 gallons per minute
Standart K-Faxtor
1/2”: 550 pulses per gallon
3/4”: 330 pulses per gallon
Accuracy
+/- 1% of full scale
Regulatory





Dimension

DIM
½ INCH
¾ INCH
A
2.5
2.5
B
9.2
10.4
C
2.8
2.8
D
4.35
5.1
E
¾ in. BSPP
1 in. BSPP
F
1/2 NPT
3/4 NPT

wma flowliquid Updated at : 08.40