Bamo BAMOMATIC Electromagnetic Flow Meter

Wiratama Mitra Abadi 01 05.27 flow measurement,

Bamo BAMOMATIC Electromagnetic Flow Meter is a flow meter based on the principle of electromagnetic induction to measure flow-rate on electrically conductive liquids ( > 20 μS/cm). They are perfectly suited for dosing or totalizing liquids. Each instrument is calibrated on a bench test at ± 5 pulses for 1000 pulses (Water at 20 ° C). Density of the liquid, its temperature or its pressure have no influence on the measurement; No moving parts in this flow-meter: it ensures operatings without mechanical wear.

The measuring principle is based on Faraday's law. In an electromagnetic flow-meter, the liquid section is in a magnetic field created by solenoid coils. Electrode sensors are on plane perpendicular to this field, in contact with the (conductive) liquid and allow measurement of the generated voltage. This voltage is directly proportional to the fluid velocity and therefore to the flow rate (for a constant flow section).

Bamo BAMOMATIC Features:

The most competitive on the market
Ranges from 0.25 l/min up to 150 l/min
Pulse output
Small dimensions

Application:

Mechanical and industrial engineering fields
Cleaning process
Liquid dosage
On board skids, etc.

Specification:

Power supply		24VDC/±3VDC
Consumption		20 mA / 0.65 W
Protection		Against reverse polarity (diode)
Output signal		NPN Type
Status indicators		Red LED = power
		Green LED = output pulses
Electrical connection		DIN 43650-A plug
Fittings		½" ; ¾" ; 1” (according the model)
Nominal diameter		8, 14 or 18 mm (according the model)
Measuring tube material		PVDF (Red housing)
		Option: Delrin (Blue housing)
Electrodes		AISI 316 L
Conductivity lower limit		20 μS/cm
Pressure limits		10 bar at 20 °C ; 8 bar at 40 °C ; 6 bar at 60 °C
Operating temperature		-10 ... +60 °C