Bamo BV Series Metallic Flow Controller and Indicator

Bamo BV Series Metallic Flow Controller and Indicator in a vertical pipe with ascending flow; Liquid must be free of particles. The fluid passing through the controller, from bottom to top, drives a diver with built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots.

Bamo BV Series Metallic Flow Controller and Indicator

Bamo BV Series Metallic Flow Controller and Indicator Features:

• Vertical mounting
• 1 Indicator + 1 adjustable contact
• Material: stainless steel or brass
• Pressure limit 10 bar
• Flow ranges within 0.1 ... 50 l/min

The upper edge of the float indicate the flow rate: 

• The scale is graduated in l/min of water.
• The setting of trigger point is possible over the entire measuring range.
• The actual flow-rate can be greater than the high range without damaging the device (it results in a higher pressure drop).

These controllers must be installed far from any magnetic induction.

Application:

Control and indication of flow-rate in pipings (cooling, lubricating, etc.) or in any compatible skids.

Bamo BV Series Metallic Flow Controller and Indicator Specification:

Pressure limit	10 bar (Both versions, brass and stainless steel)
Pressure drop	0.01 ... 0.2 bar
Temperature limits	-20 ... +100 °C (On request: Option up to 160 °C)
Graduated scales	l/min (of water at 20 °C)
Accuracy	±5%F.S.
Contact type	N.O. (without flow)
Protection	Contact: IP 65
Connection	DIN 43650 plug-in socket, cable gland PE 9
Brass version	Anodized aluminum
Body
Diver	Nickel-plated brass
Fittings	Nickel plated brass
Direct reading tube	DURAN® 50
Seals	NBR (On request: FPM or EPDM)
Stainless steel version
Body	Anodized aluminum
Diver	AISI 316 Ti (1.4571)
Fittings	AISI 316 Ti (1.4571)
Direct reading tube	DURAN® 50
Seals	FPM (On request: NBR or EPDM)

Download Data Sheet: Metallic Flow Controller and Indicator BV Series

Ref: bamo.eu