Bamo IDP-A Z60 Flow Transmitter for IDP-A

Bamo IDP-A Z60 Flow Transmitter for IDP-A (with magnet diver) 730... series. It converts the float position into a 4-20 mA signal. The transmitter does not require any adjustment on site. Each model is specific to a measuring scale of IDP-A.

Bamo IDP-A Z60 Flow Transmitter for IDP-A

Bamo IDP-A Z60 Features:

• Flow-rate transmitter
• For IDP-A, with magnetic diver
• Output signal: 4-20 mA (3-wire)
• Already set in factory
• Plug in connector

Mandatory:

The flow indicator must integrate a magnetic diver (IDP-A series only).

Installation:

The transmitter is fixed directly to the flow indicator.

Caution:

- Output signal 4 mA corresponds to 10% of full scale; Exception⛶on⛶IDP-A⛶8000:⛶13⛶%).
- Output signal 20 mA corresponds to 100% of full scale.

Application:

For remote indication of flow-rate as indicated by the diver of IDP-A.

Bamo IDP-A Z60 Specification:

Power supply	12 ... 24 V DC (± 10%)
Consumption	< 50 mA
Resistor load	Max. 500 Ω
Analogue output	4-20 mA (3-wire)
Protection	IP65 - Plug set DIN 43650
Temperature limits	Ambient: 0 ... 50 °C

Download Data Sheet: Flow Transmitter for IDP-A Z60 - IDP/A

Ref: bamo.eu