Dwyer PUB Series Portable Ultrasonic Flow Meter Kit

Wiratama Mitra Abadi 01 23.03 flow measurement,

Dwyer PUB Series Portable Ultrasonic Flow Meter Kit utilize the transit-time difference for measuring flow rates in pipes non-invasively. They are compact and lightweight instruments incorporating the latest electronics and signal processing technologies, realizing high performance and easy operation. These devices are perfect for on-the-go flow monitoring, capable of 20 hours continuous operation with built-in, rechargeable battery.

The PUB comes with a rugged carrying case with molded foam inserts while the PUF boasts an IP67 rated case to hold and protect all equipment conveniently. Their screens offer easy to read text with convenient backlight for visual comfort. The efficient layout of the function keys adds to these units’ easy to use programming. These series offer analog as well as a pulsed outputs.

Dwyer PUB Series Features

Kit Includes:

Converter
Set of Transducers
Transducer Holders
Set Transducer Cables (6.56' (2 m))
4 to 20 mA Communication Cables
12 VDC Power Supply
Ultrasonic Coupling Grease
Set of Chains
Ruled Guide Rail
Test Block
Carrying Case

Principles of operation

Two sensors are placed on the exterior of the pipe, and each transmits an ultrasonic pulse through the pipe and fluid to the other. The velocity of the liquid flowing through the pipes causes the pulse to accelerate or decelerate. The difference in the transit times of the two pulses is used to calculate the flow rate. The use of transit time allows the flowmeter to be unaffected by pressure or temperature changes.

Application

Treated Water
River Water
Potable Water
Demineralized Water
Glycol/water mix
Hydraulic System
Diesel Oil
Sea Water

Dwyer PUB Series Specification

Service	Homogeneous liquids that do not contain air bubbles capable of ultrasonic wave propagation.
Inputs	Lemo connector cable from sensors.
Range	0.33 to 65.62 ft/s (0.1 to 20 m/s).
Display	240 x 64 pixel graphic display, high contrast black on white with backlight; Languages: English, French, German, Swedish, Italian, Spanish, Portuguese, Russian, Norwegian, and Dutch; 5.2" W x 1.5" H.
Accuracy	±0.5 to 2% of flow reading for flow rate > 0.66 ft/s (0.2 m/s) and pipe ID > 2.95" (75 mm); ±3% of flow reading for flow rate > 0.66 ft/s (0.2 m/s) and pipe ID in range 0.512 to 2.95" (13 to 75 mm); ±6% of flow reading for flow rate < 0.66 ft/s (0.2 m/s).
Power Requirements	9 to 24 VDC, (1) 5-Cell NiMH battery, internal, factory replaceable (continuous operation time: 20 hours with back-light and output off) (recharging time: 6.5 hours, power adapter used).
Power Consumption	10.5 W.
Power Adapter	110/240 VAC adapter. UK, US, European adapters included.
Temperature Limits	-4 to 275°F (-20 to 135°C).
Outputs	Analog: 1 opto-isolated output: 4 to 20 mA, 0 to 16 mA or 0 to 20 mA (selectable); Error current: 0 to 26 mA (selectable); Load resistance: 620 Ω max;
	Pulse: 1 opto-isolated MOSFET relay, 150 mA max, 500 pps max, 200 Hz max.
Enclosure Rating	Converter: IP54; Transducers: IP51.
Materials	Flame retardant injection molded ABS plastic.
Repeatability	±0.5 % of measured value or ±0.066 ft/s (0.02 m/s).
Electrical Connections	Multi-pin Lemo plugs.
Turbidity	< 3% by volume of particulate content.
Permissible Air Content	< 3% by volume.
Response Time	< 500 ms.
Weight	Unit without accessories: 2.3 lb (1.06 kg); Unit with accessories in carrying case: 13.23 lb (6.0 kg).