FLocorp MagFlo™ MMFM Magnetic Flow Meter

FLocorp MagFlo™ MMFM Magnetic Flow Meter is ideal for most liquid process applications such as pulp and paper, agricultural, chemical, water, wastewater, oil and gas, and OEM applications. The units are offered in a wide variety of sizes and flow ranges. The MAGFLO™ is available in flanged and wafer style. Line sizes available range from 1/2 inch to 24 inches.

FLocorp MagFlo™ MMFM Magnetic Flow Meter

FLocorp MagFlo™ MMFM Features and Benefits

• No moving parts
• Virtually no pressure drop
• Minimal maintenance
• Wide range of flow rate and connection sizes
• A broad selection of lining and electrode materials
• Economically priced
• HART or Modbus Communications
• Auto-Diagnostics with Alarms

Specifications

Power Supply	•  110 - 240 VAC, 45~65 Hz (Single Phase AC) •    18 - 36 VDC •  Battery		Zero-point Stability	Automatic correction or programmable
			Ambient Temperature	Hard Rubber Liner: -20 to 140ºF (-20 to 60ºC) PTFE Liner: -20 to 248º (-20 to 120ºC)
Power Consumption	Approx. 10W max. with sensors connected		Electrode Materials	Standard: SS316L Optional: Titanium; Hastelloy Alloy C; Tantalum
Accuracy	± 0.5% accuracy of rate from .98 to 40 ft/s ± 1.0% accuracy of rate from .32 to .98 ft/s
			Liner Material	PTFE, Hard Rubber, Other Liner Material Upon Request
Repeatability	0.2%
			Fluid Temperature	PTFE: 248º F standard (customized 356ºF) Rubber: 140ºF
Minimum Fluid Conductivity	5.0 micromhos/0.39”
			Pressure Limits	Standard: 165 PSIG Optional: 580 PSIG
Flow Direction	Unidirectional or bidirectional, 2 separate totalizers (programmable)
			Coil Power	Pulsed DC
Analog Outputs	4-20mA, 750ohms max load		Pipe Spool Material	SS316 Flow Tube beneath liner
Output Frequency	Scaled pulse output, (open collector) max 5Khz
			Meter Housing Material	Carbon Steel - Standard (ISO 7005-1) Polyurthane Coated Optional Stainless Steel Grounding Rings
Noise Damping	Programmable via HART or Push Buttons
Pulse Width	Programmable up to 500 ms via HART or Push Buttons
			Process Connections	Standard: ANSI 150 lbs RF Type Other sizes and pressure ratings on request
			Grounding Rings or Electrode	Standard: SS316L Optional: Titanium; Hastelloy Alloy C; Tantalum

Download Datasheet: MagFlo™, Flocorp MMFM Magnetic Flow Meter

Ref: Flo-corp.com