McCROMETER FPI Mag Insertion Electromagnetic Flow Meter - Flow Meter Indonesia - Flow meter air, flowmeter solar, gas, Ultrasonic, Vortex, Electromagnetic

Breaking

Minggu, 20 Februari 2022

McCROMETER FPI Mag Insertion Electromagnetic Flow Meter

McCROMETER FPI Mag Electromagnetic Flow Meter is ideal for capital or maintenance projects, retrofits and sites never before metered. The unique combination of accuracy, ease of installation and total cost savings make the FPI Mag the perfect choice for a wide range of Municipal and Industrial Applications. It really is The Next Generation Mag Meter.
McCROMETER FPI Mag Insertion Electromagnetic Flow Meter

McCROMETER FPI Mag Accuracy

The FPI Mag® meets or exceeds exacting industry standards of 0.5% accuracy with 3rd party testing verification. The multi-electrode design and unique operating principle delivers accuracy unmatched by other insertion meters and rivals the performance of full-bore mag meters.

AMI / AMR Smart Output™

The FPI Mag is available in battery or solar powered options for forward flow sensors, enabling installation in remote applications without access to power. Additionally, ask us about the new Smart Output feature, which allows the FPI Mag to connect to AMI / AMR systems through an encoded digital output.

Simple Installation

The insertion design of the FPI Mag allows for easy, hot tap installation, which allows the meter to be installed without interrupting service, de-watering lines, cutting pipe, welding flanges, or inconveniencing customers

Lower Costs

Customers save up to 45% on installation and the total cost of ownership because the need for heavy equipment and added manpower required during a typical full bore, flanged meter installation isn’t necessary.

Line sizes

The FPI Mag has no moving parts and a single-piece design. The multi-electrode water flow sensor contains nothing to wear or break and is generally immune to clogging by sand, grit or other debris. The FPI Mag is available with forward-flow only or bi-directional measurement for line sizes from 4 to 138 inches.

Robust construction

The sensor body is made from heavy-duty 316 stainless steel for maximum structural integrity and is hermetically sealed and protected by NSF certified 3M fusion-bonded epoxy coating.

Use in hazardous locations

  • Class 1, Division 2, Groups A-D, T5
  • Class 2, Zone 2, Groups A-D, T5

Certifications

  • ISO 9001:2015 certified quality management system
  • NSF/ANSI/CAN 61 & NSF/ANSI 372
  • Certified by MET to UL 61010-1 and MET C22.2 No. 61010-1-04
  • NEC & CEC: Class 1, Division 2, Groups A-D, Groups A-D, T5; Class 2, Zone 2, Groups A-D, T5

McCROMETER FPI Mag Specifications Measurement

Volumetric flow in filled flow conduits 4” (100 mm) to 138” (3,500 mm) utilizing insertable electromagnetic averaging sensor. Flow indication in English Standard or Metric units.

Flow Measurement

  • Method : Electromagnetic
  • Calibrated accuracy for forward and bidirectional sensors :
    ±0.5% from 1 f/s to max velocity (on next page), up to ±1% for 0.3 to 1 f/s
    ±1% for reverse flow
  • Linearity : 0.3% of Range
  • Repeatability : 0.2% of Reading
  • Direction measurement :
    395 sensor - Forward flow measurement and reverse flow indication
    394 sensor - bidirectional flow measurement

Materials

  • Coating : Fusion bonded epoxy (NSF 61 approved) coated 316 stainless steel
  • Insertion hardware : 316 Stainless Steel
  • Compression seal : Silicone Rubber
  • Sensor electrodes : 316 Stainless Steel

Temperature Range

  • Operation : -10 to 60°C (14 to 140°F) up to 250 PSI
  • Storage : -15 to 60°C (5 to 140° F)
    Note regarding storage : During freezing conditions and when meter is not in use, sensor
    must be removed from pipe and stored in dry conditions.

NOTE: Damage to the sensor caused by allowing the sensor freeze in the pipe is not
covered by the warranty.

Electrical Connections

  • Quick Connect
  • Compression gland seals

IP Rating

  • Standard model :
    Quick Connect (IP68)
    Compression gland seals (IP68)
  • HL model :
    Quick Connect (IP67)
    Compression gland seals (IP67)

Sensor Submersibility Depth

  • With standard quick connect 1.8 m (6 ft.)
  • With optional strain relief cable 9 m (30 ft.)

Certifications and Approvals

  • Standard Model :
    ISO 9001:2015 certified quality management system
    NSF/ANSI/CAN 61 & NSF/ANSI 372
    Certified by MET to UL 61010-1
  • HL Model T :
    ISO 9001:2015 certified quality management system
    NSF/ANSI/CAN 61 & NSF/ANSI 372
    Certified by MET to UL 61010-1 and MET C22.2 No. 61010-1-04
    Class I, Division 2, Groups A-D, T5
    Class I, Zone 2, IIC T5

System Options

  • Hastelloy® electrodes
  • Additional sensor cable up to 475’ (500’ max for model 395 and 200’ max for model 394)
  • Extension to hardware clearance
  • Annual verification / calibration
  • Sensor insertion tool
  • Stainless steel ID tag


Download Datasheet : McCROMETER FPI Mag Electromagnetic Flow Meter

Reference : mccrometer.com

Pages