Flux FMO 110 Flow Meter

Flux FMO 110 Flow Meter built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. In automatic mode it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier. This way e.g. motor and / or magnetic valve and the most different processes can be controlled.

Flux FMO 110 Flow Meter

The housing parts of the flow meters FMO form a measuring chamber in which the oval rotors mounted on axes can turn. The fluid flows through the measuring chamber and thus actuates the oval rotors. By the means of a Reed sensor the number of rotations is counted and forwarded as an impulse or passed on to the evaluation unit FLUXTRONIC®. This calculates the flown through quantity of the fluid based on the previously entered, medium-dependent calibrating constant.

Flux FMO 110 Flow Meter Features:

• Oval rotor design
• For thin to highly viscous pure media
• Available with  integrated evaluation unit  FLUXTRONIC^® or as impulse version
• For the use in piping systems
• High accuracy and repeat accuracy
• Signal can be forwarded to FLUXTRONIC^® or another external control as e.g. PLC
• Can be displayed in liter, gallons or kilogram
• Semi-automatic filling with a switching amplifier possible
• Can be used for ex-applications in Zone 1

Advantages:

• Very precise dosing possible
• High resistancy
• Wide range of viscosities can be covered
• Can also be used for pulsating volume flows
• Low pressure loss
• FOOD version conform EC 1935/2004 and FDA CFR 21 for contact with food available

Application:

• Oils
• Gasoline
• Solvents
• Not self-lubricating media

Specification:

• Flow rate: min. 5,7 l/min - max. 170 l/min
• Filling accuracy: +/- 0,5 %
• Operating pressure: max. 200 bar¹
• Viscosity: min. 1 mPas - max. 500.000 mPas²
• Housing Materials: Polyvinylidene fluoride, Stainless steel, Aluminium
• Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels
• Protection class: IP 54
• Repeatability: +/- 0,03 %
• Application areas: For manual or semi-automatic filling

Download Data Sheet: Flow Meter FMO 110

Ref: flux-pumps.com