Dwyer TFP-GI Series Gas Turbine Flow Meter

Dwyer TFP-GI Series Gas Turbine Flow Meter is suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.

Dwyer TFP-GI Series Gas Turbine Flow Meter

Turbine sensors with electrical transmission output for remote indication of liquid flow rate. Dwyer turbine flow transmitters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. A power adapter or mating cable assembly is required for operation.

Dwyer TFP-GI Series Features

• A 3-1/2 digit LCD informs the user of the actual flow rate
• flow rates into a linear 0 to 5 VDC output signal for recording and data logging

Specification

Service	Clean dry gases compatible with wetted materials.
Wetted Materials	PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer.
Accuracy	±3% of full scale.
Linearity	±3% of full scale.
Repeatability	±0.5% of full scale.
Temperature Limits:	41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of full scale per °C.
Pressure Limits	40 psig (2.8 bar).
Process Connection	Compression fitting
Power Requirements	11.5 to 15 VDC.
Power Consumption	35 mA @ 12 VDC.
Output Signal	0 to 5 VDC: Minimum 2.5 kΩ load.
Electrical Connections	Four-pin power and signal connector. A power adapter or mating cable required for operation.
Display	LCD, 0.39" (10 mm) digits (only in LPM).
Enclosure Rating	IP10 (NEMA 1).
Weight	0.23 lb (101 g).
Agency Approvals	CE.

Download Data Sheet: Series TFP-GI Gas Turbine Flow Meter

Ref: dwyer-inst.com