Dwyer TFP-GV Series Gas Turbine Flow Meter

Dwyer TFP-GV Series Gas Turbine Flow Meter utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A power adapter or mating cable assembly is required for operation.

Dwyer TFP-GV Series Gas Turbine Flow Meter

Gas Turbine Flow Meter sensors with electrical transmission output for remote indication of liquid flow rate. Dwyer Gas Turbine Flow Meter are suitable for a wide variety of industrial, commercial, and laboratory flow applications. A power adapter or mating cable assembly is required for operation.

Dwyer TFP-GV Series Features

• Corrosion resistant PPS body
• High repeatability with patented microturbine design
• Design accurately measures flow rates with no zero drift and no required maintenance
  
  

Application

• Industrial flow monitoring
• Commercial systems
• Laboratory equipment

Dwyer TFP-GV Series Specification

Service	Clean dry gases compatible with wetted materials.
Wetted Materials	PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer.
Accuracy	±3% of FS.
Linearity	±3% of FS.
Repeatability	±0.5% of FS.
Temperature Limits	41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of FS per °C.
Pressure Limits	40 psig (2.8 bar).
Process Connection	Compression fitting
Power Requirements	11.5 to 15 VDC.
Power Consumption	35 mA @ 12 VDC.
Output Signal	0 to 5 VDC; minimum 2.5 kΩ load.
Electrical Connections	Four-pin power and signal connector. A power adapter or mating cable required for operation.
Enclosure Rating	IP10 (NEMA 1).
Weight	0.16 lb (75 g).
Agency Approvals	CE.

Download Data Sheet: Series TFP-GV Gas Turbine Flow Meter

Ref: dwyer-inst.com