Erdco See-Flo® 3200 flow indicator

Erdco See-Flo® 3200 indicate flow rate and permit visual inspection of water, air or other transparent fluids. For general purpose industrial service, See-Flo® meters handle a wide range of process fluids in vertical or horizontal piping runs. The wedge shape of the meter housing makes See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the tempered glass window is easily removed and replaced.

Erdco See-Flo® 3200 flow indicator

Erdco See-Flo® 3200 Features

• Instantaneous flow rate measurement.
• Observe fluid conditions for color, clarity and flow.
• Use in horizontal or vertical piping systems.
• Individually calibrated for fluid and operating conditions.
• User selectable 10:1 turndown flow ranges. (See Meter Rangeability Sizing Tables)
• User selectable units of measure including dual units of measure.
• No floats to get stuck, tubes to break or dynamic seals to leak.
• Low pressure loss.
• Simple design with few parts for long service life.
  
  

Erdco See-Flo® 3200 Specifications

• Accuracy : ±2% full scale
• Repeatability : ±1% full scale
• Scales : Direct reading
• Resolution: Maximum-30 division/Minimum-15 divisions
• Rangeability : 10 to 1 turndown
  
  

Materials of Construction : 

• Housing: Aluminum,brass, 70/30 copper/nickel, 316 stainless steel
• Shunt: As housing or carbon steel
• Window: Tempered glass or polycarbonate
• Vane: Cobalt/chromium/nickel alloy with Teflon ® encapsulated magnet
• “O” rings: buna-n, ethylene propylene, Viton® or perfluoroelastomer
  
  

Piping Connections :

• 1⁄2″ to 1″ NPT Female
• 1 1⁄4″ to 4″ NPT male
• 1 1⁄2″ to 3″ Tri-clamp
• 1 1⁄4″ to 6″ Grooved
• 1 1⁄4″ to 6″ Beveled 1⁄2″ to 8″ 150# /300# RF/FF ANSI Flanges (carbon stl)
• 1⁄2″ to 8″ 150# RF ANSI Flanges (stainless stl)
• 1⁄2″ to 6″ 150# RF ANSI Flanges (aluminum)
• 1⁄2″ to 6″ 150# FF ANSI Flanges (brass)
• 15 to 25 mm DIN 2999/BS21/ISO R7 Female threaded
• 15 to 150 mm DIN PN 10 Flanges (316 stainless stl & carbon stl)
  
  

Temperature Limits :

• -23 to 85°C (-10 to 185°F) with polycarbonate window.
• -23 to 121°C (-10 to 250°F) with buna-n o-ring.
• -23 to 121°C (-10 to 250°F) with Viton®, ethylene propylene or perfluoroelastomer o-ring

ERDCO reserves the right to alter design and/or specifications without notice. Viton^® is a registered trademark of E.I. duPont de Nemours and Co.

Download Datasheet : Erdco See-Flo® 3200

Reference : erdco.com