Dwyer OP Series Orifice Plate Flow Meter - Flow Meter Indonesia - Flow meter air, flowmeter solar, gas, Ultrasonic, Vortex, Electromagnetic

Breaking

Selasa, 18 Januari 2022

Dwyer OP Series Orifice Plate Flow Meter



 Dwyer OP Series Orifice Plate Flow Meter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate.

It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2" to 24" and can be used with compatible liquids and gases.

Orifice plate flow meters are differential pressure sensors for flow rate. Can be used with gases, liquids, corrosive, and high-temperature fluids. Applications include steam flow, boiler feedwater, and fluid flow rates in building water lines. Designed for use wherever there is an application for a conventional flow orifice plate.

Dwyer OP Series Features

  • Mounted with standard flanges
  • Standard "corner tap" configuration
  • Corrosion free material
  • Simplified installation
  • Built in metering taps (1/4" female NPT STD)
  • Proven through a wide range of applications for accuracy and energy efficiency
  • Assures long term reliability and accuracy

Application

  • Fluid flow rates in building water lines
  • Boiler feed water
  • Cooling water
  • Combustion or compressed air
  • Steam flow

Another Article:

Dwyer OP Series Specification

ServiceCompatible liquids and gases.
Wetted Material304 SS, Buna-N gaskets.
Accuracy±0.6% full scale flow. (Beta= .2-.6) ±0.7% for Beta greater than .6.
Temperature Limits-50 to 200°F (-45 to 93°C).
Pressure Limits150 psi max.
Head Loss1 - Beta ratio², eg: 1 - 07² = 1 - 0.49 = 51% of the d.p.
Line Sizes1/2" to 24".
Process Connections1/4" female NPT.
InstallationStandard flange 125#/150# rating.
Pipe RequirementsGeneral requirements 10 diameter upstream and 5 diameter downstream.
WeightVaries with line size.

Download Data Sheet: Series OP Orifice Plate Flow Meter

Ref: dwyer-inst.com

Pages