Dwyer Series P2 Piston Flow Switch - Flow Meter Indonesia - Flow meter air, flowmeter solar, gas, Ultrasonic, Vortex, Electromagnetic

Breaking

Minggu, 13 Februari 2022

Dwyer Series P2 Piston Flow Switch


 

Dwyer Series P2 is comprised of PPE & PS (polyphenylene ether and polystyrene) housing and piston and 316 Stainless Steel spring and stop pin. All wetted parts are FDA compliant. Economical and superior design make this an excellent switch for pure water equipment, filter life monitoring, heat exchangers, and cooling applications.

Flow Switch Sensors with an electrical contact output at a specific flow rate have different types of switches, which are paddle, thermal, piezo, and shuttle/piston.

Shuttle or piston flow switches are sensors with an electrical contact output at a specific flow rate. Models are used with oil, air, water and gases. Applications include oil flow control, low flow detection in cooling lines, and high pressure lubrication systems. Rugged construction and excellent chemical compatibility simplify flow/no flow detection.

The compact Series P2 Flow Switch utilizes a piston-type design for both air and pure water applications. The switches have preset actuation points from 0.05 to 1.0 GPM for water and 25 CFH to 5 CFM for air. The piston design incorporates a hermetically sealed SPST magnetic reed switch.

Dwyer Series P2 Features

  • Piston design incorporates a hermetically sealed SPST magnetic reed switch
  • All wetted parts are FDA compliant
  • Economical design

Application

  • Pure water equipment
  • Filter life monitoring
  • Heat exchangers
  • Cooling applications

Another Article:

Specification

ServiceCompatible liquids or gases.
Wetted MaterialsHousing: PPE & PS (polyphenylene ether and polystyrene); Piston: PPE & PS (polyphenylene ether and polystyrene) and epoxy; Spring and Stop Pin: 316 SS.
Temperature Limits0 to 212°F (-18 to 100°C).
Pressure Limits150 psi (10.3 bar) @ 70°F (21°C); 50 psi (3.4 bar) @ 212°F (100°C).
Switch TypeSPST, N.O.
Electrical Rating17 A @ 120 VAC, .08 A @ 240 VAC, .13 A @ 120 VDC, .06 A @ 240 VDC.
Electrical Connection22 AWG, 18" (45.7 cm), PVC lead wires.
Process Connection1/4" male NPT.
Mounting OrientationAny position. Set points shown are based on vertical, inlet down position.

Download Data Sheet: Series P2 Piston Flow Switch

Ref: dwyer-inst.com

Pages