Flocorp UltraFlo™ UFD3 Ultrasonic Portable Flow Meter

Flocorp UltraFlo™ UFD3 is a fixed or portable, clamp-on flow meter that is easy to install, accurate, and simple to use. The UltraFlo™ UFD3 is equipped with intelligent software to ensure high accuracy and low-velocity response. The flow meter has the ability to be a fixed unit or portable unit.

Flocorp UltraFlo™ UFD3 Ultrasonic Portable Flow Meter

The UltraFlo™ UFD3 ultrasonic flow meter is widely used in applications such as oil and gas, water treatment, pure water, chemical, and much more.

Flocorp UltraFlo™ UFD3 Features and Benefits

• Backlit bright LCD display
• RS232/RS485 or Modbus communication
• Portable or Fixed unit
• Highly accurate and easy to install
• Clamps onto the pipe, requires no need to cut pipe
• 5-year warranty

Specifications

PERFORMANCE
FLOW RANGE	±0.09ft/s ~ ±40ft/s (±0.03m/s ~ ±12m/s)
ACCURACY	±0.5% of reading (for ±1.5ft/s~±40ft/s)
REPEATABILITY	0.15% of measured value
LINEARITY	±0.5%
PIPE SIZE	1” to 200” (25mm to 5000mm). Pipe size under 1” is an option
FUNCTION
OUTPUTS	Analog output: 4~20mA, max load 750Ù.
	Pulse output: 0~9999Hz, OCT, (min. and max. frequency is adjustable) Relay output: SPST, max 1Hz,(1A@125VAC or 2A@30VDC)
COMMUNICATION	RS232 & RS485
MEMORY	TF card (Max 4G)
POWER SUPPLY	90 to 245 VAC, 48 to 63 Hz. Or 10 to 36VDC
DISPLAY	240*128 back lit LCD
	Transmitter: -40º~140º (-40º~60º)
TEMPERATURE	Transducer:-40º~176º (-40º~80º, standard)
HUMIDITY	Up to 99% RH, non-condensing
PHYSICAL
TRANSMITTER	IP65
TRANSDUCER	IP68
	Encapsulated design
	Double-shielded transducer cable Standard/maximum cable length: 30ft/900ft(9m/274m)
Specifications are subject to change without notice.

 

PERFORMANCE			TEMPERATURE	Transmitter: -40º~140º (-40º~60º) Transducer:-40º~176º (-40º~80º, standard)
FLOW RANGE	±0.09ft/s ~ ±40ft/s (±0.03m/s ~ ±12m/s)
			HUMIDITY	Up to 99% RH, non-condensing
ACCURACY	±0.5% of reading (for ±1.5ft/s~±40ft/s)
			PHYSICAL
REPEATABILITY	0.15% of measured value
			TRANSMITTER	IP65
LINEARITY	±0.5%
			TRANSDUCER	IP68 Encapsulated design Double-shielded transducer cable Standard/maximum cable length: 30ft/900ft(9m/274m)
PIPE SIZE	1” to 200” (25mm to 5000mm). Pipe size under 1” is an option
FUNCTION
OUTPUTS	Analog output: 4~20mA, max load 750Ù. Pulse output: 0~9999Hz, OCT, (min. and max. frequency is adjustable) Relay output: SPST, max 1Hz,(1A@125VAC or 2A@30VDC)
			Specifications are subject to change without notice.
COMMUNICATION	RS232 & RS485
MEMORY	TF card (Max 4G)
POWER SUPPLY	90 to 245 VAC, 48 to 63 Hz. Or 10 to 36VDC
DISPLAY	240*128 back lit LCD

Download Datasheet: UltraFlo™ UFD3, Flocorp-Ultrasonic Clamp-On Flow Meter

Ref: Flo-corp.com