Isoil ISOMAG MS 3810 Electromagnetic Insertion Sensor is used for mounting on pressure lines with diameters from 80 to 8000 mm and it is ideal for temporary measurement campaigns, line monitoring and leak detection. Wide choice of sensor lengths for installation in pipes of different diameters with the possibility of integrating pressure measurement.
Isoil ISOMAG MS 3810 Electromagnetic Insertion Sensor |
Isoil ISOMAG MS 3810 Technical Data
OVERALL FEATURES | |
Size for pipe line Ø | Size 0 max insertion depth 150 mm Size 1 max insertion depth 300 mm Size 2 max insertion depth 500 mm Size 3 max insertion depth 700 mm Size 4 max insertion depth 1000 mm Size 5 max insertion depth 2000 mm Size 9 max insertion depth 80 mm |
Minimum conductivity | 5 mS/cm (20 mS/cm for ML145/ML255) |
Minimum pipe diameter | 80 mm |
Humidity Range | 0÷100% (IP 67) |
Accuracy | See table at page 10 |
CE Certification | Yes |
STANDARD FEATURES | |
Body material | Stainless steel AISI 316 |
Nominal pressure | 2500 kPa |
Process connection | 1” Threaded |
Version – protection rating | Compact IP67 |
Connection material | Stainless steel AISI 304 |
Head material | PEEK |
Gasket material | FPM (O-ring) |
Liquid temperature | 0 °C to 100 °C |
Electrodes material | Hastelloy C76 |
OPTIONAL FEATURES | |
Size for pipe line Ø | Others on request |
Body material | Others on request |
Process connection | Others on request |
Electrodes material | Others on request |
Version – protection rating | Separate version (max 20m) – IP 68 Separate version (max 500 m), with preamplifier – IP 67 (OPT. IP 68) |
Accessories | Pressure sensor |
Download Datasheet: Isoil Electromagnetic Insertion Sensor MS 3810 ISOMAG
Reference: isoil.it