Flux FMC 250 Flow Meter work on the nutating disc principle. Here, the liquid flow actuates the nutating disc. With a Reed sensor the number of rotations is counted and forwarded as an impulse or passed on to the evaluation unit FLUXTRONIC®. This calculates the flow quantity of the fluid based on the previously entered, medium dependent calibrating constant.
 |
| Flux FMC 250 nutating disc Flow Meter |
Flux FMC 250 Flow Meter Features:
- Nutating disc principle
- For low viscosity media
- High measuring accuracy
- Easy calibration
- Reliable operation
- No mains connections required
- Signal transmission to evaluation unit FLUXTRONIC® or external control unit such as PLC possible
- Version also available for hazardous area
Advantages:
- Batch operation possible (automatic mode)
- High resistance
- Insensitive to small solids
- Easy handling
- Easy assembly
- FMC for use in hazardous areas
Application:
- Housing material PP:
Battery acid, formic acid, ammonia, formic acid, boric acid, brake fluid, calcium chloride, acetic acid, ferric-III- chloride, photo developers, glycol, mineral oil, sodium hydroxide, phosphoric acid, hydrochloric acid, sulfuric acid to 60 % tartaric acid, zinc chloride, citric acid - Housing material PVDF:
Hydrobromic acid, chloric acid, carbonic acid, hydrofluoric acid, potassium bromide, sodium hypochlorite, paraffin emulsion, nitric acid to 75 % sulfuric acid to 98 %, trichlorobenzene, hydrogen peroxide
Specification:
- Flow rate: min. 25 l/min - max. 250 l/min
- Filling accuracy: +/- 1 %
- Operating pressure: max. 6 bar
- Size of solids: max. 1,5 mm
- Viscosity: min. 1 mPas - max. 2500 mPas
- Housing Materials:
- Media / Fluids:
- Protection Class: IP 54
- Application area: For stationary use in plant engineering
- Measurement error of the flow rate: +/- 1,5 %
- Repeatability: +/- 0,3 %
Download Data Sheet: Flow Meters FMC 250 Series
Ref: flux-pumps.com
Hello, my name is Jack Sparrow. I'm a 50 year old self-employed Pirate from the Caribbean.