AW-Lake TA3 Sanitary Turbine Flow Meter

AW-Lake TA3 Sanitary Turbine Flow Meter are constructed of 316 stainless steel for a durable and economic flow metering in sanitary environments. This meter is 3-A Sanitary Standard Authorized as all materials and polishing technologies utilized during manufacturing on internal components comply with FDA requirements.

AW-Lake TA3 Sanitary Turbine Flow Meter

n service around the world in sanitary industries including dairy, brewing, food processing and pharmaceutical processing. This meter is available in nine different flow ranges from 0.6 to 400 gallons/day, and can withstand system pressures up to 20,000 psi.

This 3-A Sanitary Standard Authorized turbine flow meter is used in plants around the world, in industries including dairy, brewing, wine production, food processing and pharmaceuticals.

AW-Lake TA3 Sanitary Turbine Flow Meter Features:

• Sanitary Standards: Conforms to 3-A Sanitary Standards
• Measuring Accuracy: ±1.0% of reading or better (±1% of reading over the upper 70% of the measuring range for 3/8, 1/2 and 3/4 in. meters)
• 9 Flow Ranges: 0.6 to 400 GPM
• Pressure Rating: up to 1,000 PSI
• Temperature Rating: -150˚ to 300˚F (-100˚ to 149˚C)

Advantages:

1. Durable & Cost Effective: This meter’s rugged 316 stainless steel construction provides a durable and economic flow metering solution to sanitary environments.
2. Excellent Accuracy: The TA3 sanitary turbine flow meter can achieve a flow accuracy up to 1.0% of reading and is repeatable up to 0.1%.
3. Federal Compliance: The most up-to-date polishing technology is utilized during manufacturing on all internal components, and all materials comply with FDA requirements.
4. Flexible: This meter is available in nine different flow ranges, covering flows from 0.6 GPM up to 400 GPM.
5. Versatile: This flow meter provides local flow rate and volume totalization and will interface with most displays, controllers and computers.

AW-Lake TA3 Sanitary Turbine Flow Meter Specification:

• Measuring Accuracy: ± 1.0% of reading or better (±1% of reading over the upper 70% of the measuring range for 3/8, 1/2 and 3/4 in. meters)
• Repeatability: ± 0.1%
• Flow Measuring Range:
  • .6 to 3
  • .75 to 7.5
  • .75 to 7.5
  • 2 to 15
  • 3 to 30
  • 5 to 50
  • 15 to 180
  • 40 to 400
• Turn Down Ratio: 10:1
• Maximum Operating Pressure: 1000 psi (sanitary clamp rated at 250 psi at 300°F)
• Maximum Operating Temperature: Fluid temperature up to 300°F
• Electrical Connection: NEMA 6 Connector
• End Connection: Tri-clamp
• Materials Of Construction:
  • Body:  316L Stainless Steel
    
  • Rotor Support:  316L Stainless Steel
    
  • Rotor:  Nickel Plated Stainless Steel
    
  • Bearings:  Nickel Bindery Tungsten Carbide

Download Data Sheet: TA3 Sanitary Turbine Flow Meter

Ref: aw-lake.com