Flux FMO 140 Flow Meter

Flux FMO 140 Flow Meter built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. In automatic mode it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier. This way e.g. motor and / or magnetic valve and the most different processes can be controlled.

Flux FMO 140 Flow Meter

The flow meters FMO consist of a measuring chamber with oval rotors. The fluid runs through the measuring chamber and thus drives the oval rotors. With a REED sensor the number of rotations is counted and passed to the external FLUXTRONIC®. This calculates the flow quantity of the fluid on the basis of a previously given, medium dependent calibration constant.

Flux FMO 140 Flow Meter Features:

• Oval rotor design
• For thin to highly viscous pure media
• Available with  integrated evaluation unit  FLUXTRONIC^® or as impulse version
• For the use in piping systems
• High accuracy and repeat accuracy
• Signal can be forwarded to FLUXTRONIC^® or another external control as e.g. PLC
• Can be displayed in liter, gallons or kilogram
• Semi-automatic filling with a switching amplifier possible
• Can be used for ex-applications in Zone 1

Application:

• Oils
• Gasoline
• Solvents
• Not self-lubricating media

Advantages:

• Very precise dosing possible
• High resistancy
• Wide range of viscosities can be covered
• Can also be used for pulsating volume flows
• Low pressure loss
• Also available in Version with FDA CFR 21

Flux FMO 140 Flow Meter Specification:

• Flow rate: min. 9,5 l/min - max. 245 l/min
• Filling accuracy: +/- 0,5 %
• Operating pressure: max. 16 bar¹
• Viscosity: min. 1 mPas - max. 500.000 mPas²
• Housing Materials: Stainless steel, Aluminium
• Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels
• Application areas: For stationary use in plant engineering such as e.g. pipelines
• Protection class: IP 54

Download Data Sheet: Flow Meter FMO 140

Ref: flux-pumps.com